HYPER-G Series
From pure 4G & 5G upgrades to full cellular-plus-LEO constellations,
Hyper-G gives you one mast-top platform that can work with the routers you already trust or replace them entirely.
Multi-modem 5G, >1 Gbit/s aggregate
2.5G and 10G backhaul options
Works standalone or with Peplink, Cradlepoint & more
Optional LEO integration for Starlink / Amazon-class terminals
One mast-top platform, multiple ways to deploy
Every vessel starts from the same foundation: a Hyper-G radome on the mast with 36 high-gain directional antennas and multiple 4G/5G modems right next to them. From there, you decide how much routing you want inside the radome, how tightly you want it to integrate with your existing SD-WAN router and whether LEO belongs in the mix.
The result is a compact family of configurations rather than dozens of random SKUs. You pick the deployment pattern, we tune the modem mix, uplink and SIMs to match your routes and policies.
Which Hyper-G fits you best?
Answer three simple questions and match yourself to a model. No forms, just pattern recognition.
Do you already have a router you like?
Yes, Peplink / Cradlepoint / Cisco / MikroTik. You’ve invested in SD-WAN, VPNs and policies you don’t want to rewrite.
Recommended
Hyper-G SD-WAN Bridge
Hyper-G acts as a multi-WWAN radio head, each modem delivered as its own VLAN to your router.
Do you want LEO involved?
“Yes, from day one.” You want cellular near shore and LEO offshore under one dome.
Recommended
Hyper-G Constellation
Cellular modems, LEO terminal and router inside a single radome.
How much do you want to touch the network?
“As little as possible.” You want the dome to behave like a very smart modem.
Recommended
Hyper-G Core
Router inside the radome, single cable down, simple interface to your existing LAN.
The HYPER-G models
Hyper-G Core
All-in-one cellular in a dome. Router included.
Hyper-G Core puts the 4G/5G modems and the router inside the radome. One or two Ethernet drops connect back to your onboard switch. No below-deck unit, no coax RF runs, no extra boxes to find room for in a rack.
Best for: vessels without complex SD-WAN who want serious 4G/5G distance and stability with minimum integration work.
Backhaul: 1G or 2.5GBASE-T, with 10G fibre available on high-capacity configurations.
Hyper-G SD-WAN Bridge
Hyper-G as a multi-WWAN radio head for Peplink, Cradlepoint & others.
Hyper-G SD-WAN Bridge feeds each modem as its own tagged VLAN over a single trunk to your existing router. Your Peplink/Cradlepoint/MikroTik sees up to six independent WANs, ready for SpeedFusion, SD-WAN policies and VPNs. Hyper-G handles RF and distance, your router keeps doing what it does best.
Best for: fleets with established SD-WAN stacks that want better cellular physics without replacing routers.
Backhaul: 2.5GBASE-T or 10G fibre for aggregated 5G capacity and multiple WWAN VLANs on one link.
Hyper-G Constellation
Cellular, LEO and router inside one radome.
Hyper-G Constellation is the “everything in one dome” configuration. Multiple 5G modems, a LEO terminal and a router live under a single radome, with automatic failover and bonding between cellular and LEO. One cable runs down to your core switch.
Best for: newbuilds and major refits that want to minimise deck clutter and have a single high-performance connectivity platform.
Backhaul: 2.5G or 10G fibre uplinks for combined cellular + LEO throughput and multiple onboard VLANs.
Hyper-G Custom
When your diagram doesn’t fit in a brochure.
Separate corporate and guest domes, government-grade segmentation, dual routers, non-standard power domains – Hyper-G Custom exists for yards and integrators who live off drawings. We start from the same antenna and modem platform and design the routing and cabling around your constraints.
Best for: tenders, mission-critical projects and “we need to talk through this on a whiteboard” scenarios.
Plays nicely with the routers you already trust
Hyper-G does not force you into a new routing stack. When used as an SD-WAN Bridge, each modem is delivered as its own tagged VLAN over a single trunk to your existing router. Peplink, Cradlepoint, Mikrotik and other vendors simply see multiple independent WANs ready for their bonding, failover and VPN logic.
That means you can keep your current SpeedFusion profiles, firewall rules and VPN topologies while upgrading the RF, distance and reliability of the underlying cellular layer.
Per-WWAN VLANs
Each modem can be mapped to its own VLAN (for example VLAN 101-106) so your SD-WAN router treats them as distinct WAN interfaces. No hacks, no virtual NIC tricks, just clean tagged Ethernet or fibre.
2.5G and 10G uplinks
With multiple 5G modems in one dome, the theoretical aggregate easily pushes beyond 1 Gbit/s. Hyper-G offers 2.5G copper and 10G fibre uplinks so the trunk to your router does not become the permanent choke point.
Separate power by design
Hyper-G does not depend on PoE++. The dome has its own dedicated DC feed sized for full radio, router and LEO load. The Ethernet or fibre downlink carries data only, which keeps thermal load and brownouts under control in real-world installations.
SIMs you don’t have to think about
Hyper-G ships with pre-provisioned SIMs installed inside the radome. Crew can’t “borrow” them, and you don’t have to climb the mast every time a provider changes offer. For many customers, we simply deliver Hyper-G as a service: you tell us which operators you prefer and we keep the SIMs active, optimised and documented.
Because the SIMs live next to the modems, not in a rack somewhere, we can also design multi-operator and multi-country setups without turning your comms room into a drawer full of plastic cards.
Remote SIM provisioning/eSIM support is under development. The hardware is designed to support remote profile loading so that, over time, SIM changes can move from the mast to the browser.
Which Hyper-G for which vessel?
Workboats & tugs
Short to medium routes, often hugging the coast but needing connectivity in rough RF environments. We typically deploy Hyper-G Core for simple, robust connectivity or Hyper-G SD-WAN Bridge when an existing Peplink or Cradlepoint is already doing the routing.
Offshore, survey & government
Longer missions near and beyond the cellular horizon, often with strict segmentation and LEO backup. Hyper-G SD-WAN Bridge and LEO-Ready are the usual starting points, with Hyper-G Constellation for newbuilds that want everything inside one radome.
Yachts & passenger
High expectations for “home-style” internet, heavy guest traffic and mixed cruising grounds. Hyper-G Constellation offers a clean, single-dome solution with cellular near shore and LEO offshore, while Hyper-G Core with LEO-Ready works well for smaller vessels and phased upgrades.
Get your Hyper-G configuration
Tell us what router you run today, how far you typically sail from shore and whether LEO is on the table. We’ll match you to a Hyper-G model, propose a backhaul and SIM design, and give you a pricing range. No obligation, just a concrete starting point.
Contact us
Call:
UK +44 (20) 33.55.87.97
US +1 (786) 533.3025
BE +32 (3) 808.20.11
Email:
[email protected]
Location:
Available worldwide.